A4 self-adhesive polyester labels, white – 100 sheets

White self-adhesive A4 polyester labels for laser printers

These labels are made of white polyester and are self-adhesive. The pack contains 100 sheets in A4 format, which you can print with a laser printer or copier. Each sheet carries one full-page label measuring 210 × 297 mm. So you don't get a collection of small labels, but one large surface that you can cut to size for signs, notices or stickers.

Polyester is weather- and moisture-resistant. This makes the labels suitable for markings that will be exposed to moisture, such as on containers or shelves. The film is 60 µm thick.

Printing and using the labels

First do a test print on plain paper and hold it up to the light against the label film. This shows you whether your design is positioned correctly. Most printers cannot print right up to the edge of the sheet, so allow a small margin all round. The backing sheet has a centre cut at 10.5 cm, which makes it easier to peel the label from the backing. Cut the labels to the size you want before peeling them off, so the adhesive stays clean. Stick them onto a clean, dry, grease-free surface and smooth them from the centre outwards to avoid air bubbles.

White A4 labels product details

• Material: polyester
• Colour: white
• Format: A4, 210 × 297 mm, 1 label per sheet
• Thickness: 60 µm
• Self-adhesive, weather- and moisture-resistant
• For laser printers and copiers
• Contents: 100 sheets

You will also need: laser printer or copier; for cutting to size, scissors or a craft knife with a ruler