Silicone Mould 3D Snail for Plaster, Concrete and AC730

3D Snail Silicone Mould for Plaster, Concrete and Casting Compound

With this silicone mould you can cast a three-dimensional snail in plaster, concrete or the water-resistant AC730 casting compound. The mould is made of very soft silicone and is very finely worked, so even small details of the snail show up in the cast.

At approx. Ø 73 × 32 mm, the figures are handy in size, for example as decoration for the garden or windowsill. The pack contains 1 mould.

Casting the snail

Place the mould on a level surface so the cast does not turn out crooked. Mix the casting material according to the instructions on the pack and pour it slowly into the mould. Then tap the mould lightly so that air bubbles rise to the top and the surface becomes smooth. Allow the cast to harden completely before removing it from the mould. Thanks to the soft silicone, you can carefully flex the mould and release the cast without damaging fine details.

Note on use

Once you have cast plaster, concrete or casting compound in the mould, do not use it for food again.

3D Snail silicone mould product details

• Contents: 1 piece
• Material: soft silicone
• Shape: snail (3D)
• Size: approx. Ø 73 × 32 mm
• Suitable for: plaster, concrete, water-resistant AC730 casting compound

You will also need: casting material such as plaster, concrete or AC730 casting compound, and a container for mixing