Rayher pendant light socket, black, E27, 1 m cable

Rayher pendant lamp holder, black – 1 m cable with E27 socket for DIY hanging lamps

The Rayher pendant lamp holder in black is a 1 m cable with an E27 socket and screw ring. You need it to build your own hanging lamp, for example with a wooden slat lamp, a lampshade or lampshade film.

The lamp holder is not included with the Rayher slat lamps and is recommended there as an accessory. 1 piece is supplied in a retail bag. The bulb and shade are not included.

What to bear in mind when building a lamp

Protection class II means the holder is double insulated and does not need an earth conductor. Choose a bulb with an E27 cap and a maximum of 60 W, as that is the limit for this holder. If your shade is made of paper or film, make sure it sits far enough from the bulb. The 1 m length helps you plan the hanging height: measure beforehand how far the lamp should hang above the table or floor, because the cable cannot be extended without replacing it.

Rayher pendant lamp holder black product details

• Manufacturer: Rayher, art. no. 23100576
• Contents: 1 piece, 1 m cable, with screw ring
• Socket: E27
• Input voltage: 220–240 V
• Protection class: II
• Suitable for bulbs up to max. 60 W
• Colour: black
• WEEE reg. no.: DE 52852228

You will also need: a bulb with an E27 cap up to max. 60 W, plus a lampshade, slat lamp or lampshade film.

Connection to the mains must be carried out by a qualified electrician. Use only with bulbs up to max. 60 W. Electrical appliances must not be disposed of with household waste, because substances that are harmful to people and the environment can leak from old appliances in landfill sites. Find out about the collection points in your local area and use them. In Germany you are legally required to do so. Returning old appliances is free of charge for private households.