edding 8875 Drill Hole Spray Marker, Neon Green

edding 8875 Drill Hole Spray Marker – Accurate Marks in Deep Drill Holes

The edding 8875 drill hole spray marker by Marxman was developed for marking hard-to-reach spots. Conventional markers quickly reach their limits with deep drill holes or fixing holes. The edding 8875 instead places the mark through the drill hole onto the surface behind it, making it easier to transfer drilling positions accurately.

The neon green chalk spray is clearly visible on many materials and is suitable, for example, for fitting shelves, cabinets, hinges, brackets and other components. Thanks to the patented pump mechanism, the chalk can be sprayed precisely through drill holes approx. 50 to 100 mm deep.

Non-permanent marks for installation and trades

The specially shaped nozzle of the edding 8875 is suitable for drill holes with a diameter of approx. 3 to 13 mm. This means you can also mark drilling positions that would be hard to reach with an ordinary pen or deep hole marker.

Another advantage is its flexible use: the spray marker can be used from different angles and even overhead. The sprayed chalk is not permanent and can usually be wiped off closed, smooth surfaces easily. Marks can therefore be corrected quickly or removed again after installation.

– Drill hole spray marker for hard-to-reach marking points
– Suitable for drill holes approx. 50–100 mm deep
– For drill hole diameters of approx. 3–13 mm
– Accurate transfer of drilling and fixing positions
– Neon green chalk for good visibility
– Non-permanent marking
– Easy to wipe off closed surfaces
– Can be used from almost any angle
– Also suitable for overhead work
– Patented pump mechanism
– For shelves, cabinets, hinges and installation work

Our tip: The edding 8875 is particularly handy when existing holes in a component need to be transferred exactly onto a wall or another surface. The component can be held in its intended position while the drilling points are marked directly through the fixing holes.