Efco quartz clock movement with hands and fixing set

Efco quartz clock movement with hands – for your own clocks and as a replacement

You need the Efco quartz clock movement with hands and fixing set to build your own clock or to replace a faulty movement. The matching hands are included in the pack, so you do not need to buy them separately.

The movement is available for different dial thicknesses. Choose the version from the options.

Which version suits your dial?

What matters is the thickness of your dial, that is, the thickness at the point where the movement is fixed. It must fall within the range of the version you choose, otherwise the movement cannot be fixed properly. Measure the thickness before ordering, preferably with a calliper. If your dial is thinner than the stated maximum, you can usually use that version.

Fitting

Drill the dial centrally to suit the spindle of the clock movement and fix the movement from behind using the fixing set supplied. Do not put the hands on until the movement is fitted. Before hanging the clock, check that the hands turn freely and touch neither the dial nor each other.

Efco quartz clock movement product details

• Manufacturer: Efco
• Product: quartz clock movement with hands and fixing set
• Contents: 1 piece
• Versions: by maximum dial thickness, choose from the options

You will also need: battery for the clock movement

Note: waste electrical equipment must not be disposed of in the household waste bin.